F4U-1A Corsair

Here are some new shots of my corsair. I sprayed a coat of future on and added the decals. This particular corsair will be that of Lt. Danny Cunningham's of VF17 the Jolly Rogers. I wanted to do Cunningham's Corsair because it was different than many of the Ira Kepford, Chico Freeman, Roger Hedrick and Tommy Blackburn Corsairs that I have often seen modeled. Cunningham's was rare in that it had split numbers as part of its aircraft as ID while the others I mentioned while having the larger Aircraft numbers  did not have the Split numbers which were more common on the later F4U-1D Corsairs that were painted in all Navy Blue.

F4U-1A Corsair

Here's my 1/48 Scale F4U-1A Corsair. It is the excellent Tamiya kit. I have finished base coating it and will next move on to adding the decals and doing the weathering.

Panther 214 Stoumont Dec 16, 1944

Here is an update on the Uscha. Rech's Panther 214 I was doing back in 2010 but never quite finished. I removed the original Magic Tracks and put on a new set of DS tracks and replaced the idler with the correct 655mm larger Idler that was actually on Panther 214. I had originally hand painted the camo scheme but with some new information and the new Panther book from Canfora  in hand I took a stab at spray painting the camo scheme on. In order to get the tight pattern of the camo I had to do multiple passes with my my airbrush. I did not use any masks during the painting process. For the basecoat I used my Iwata AB with a .35mm needle while for the camo I used my badger AB with a .20mm needle which gave me tighter control of my lines and minimized the over spray. The turret took 3 hours to paint and hull about 2 hours.

Here are some shots of the new paint scheme. I had originally weathered the road wheels in  my first attempt. The next step will be to add the decals and weathering of all surfaces.

3rd Armored Division M4A3(75)W

I have posted updates on a few sites but  here is the latest. Base coat is on along with some initial filters and washes. For the Filter I used a grey filter made from Windsor and Newton Black and White. For the wash I used AK Interative's Dark brown wash for green vehicles.

3rd Armoured Division M4A3

While working on my U.S. 4th Armoured Division M4A3E8 I received a set of Sherman dished road wheels I ordered from Great Models. Looking at the Tamiya M4A3(75)W I had on the shelf I decided to take it down and give it a go. Besides, I  would like to pick up the new Dragon M4A3(75)W but figured I should get this one done first.

This is the kit.

I decided to model a 3rd Armoured Division M4A3 that served with Courtney Hodges U.S. First Army in Northwest Europe. The 3rd began adding  extra amour to their tanks in August/September 1944 which were often taken from destroyed Shermans. Many of their M4's and M4A3's had applique armour added to the turret and Glacis, while others had just applique armour added to the turret. In my case I am going to model an M4A3 with applique armour added to the turret. The 3rd armoured division was a heavy division with 2 armoured regiments as opposed to higher numbered  U.S. armoured divisions which possessed one armoured regiement. The division was also a big proponent of camouflage and crews often painted their tanks in OD/Black a process which  began during Operation Cobra and the subsequent breakout in France.

Here's a picture of a 3rd Armoured Division M4A3(75)W during operations in Cologne near the end of the war. Note the Applique Armour on the turret which was  most probably taken from the turret of a destroyed Sherman. I am going to loosely base my project on this tank.

And here are a couple of shots of my work in progress.

Turret Complete. Added casting marks, sighting vain, pads for lifting rings

M4A3E8 Update

Here is another update on my M4A3E8. I got the stowage done and added the national insignia. I hope you like it. Please feel free to leave a comment.

Cheers,
Dave.